| General Information |
| Product Type | Line-interactive UPS |
| Manufacturer Part Number | SMART500RT1U |
| Manufacturer Website Address | www.tripplite.com |
| Marketing Information | SmartPro 500VA Rack/Tower UPS System with seven outlets protects network servers against damage and downtime due to blackouts, brownouts, overvoltages and surges. Advanced automatic voltage regulation keeps servers productive through brownouts and overvoltages without using battery power. Up to four built-in communication ports and intelligent operation provide advanced power monitoring and control when used with included PowerAlert Software. Adapts to 1U rackmount or tower applications. |
| Manufacturer | Tripp Lite |
| Product Name | SmartPro 500VA Rack/Tower UPS |
| Product Line | SmartPro |
| Brand Name | Tripp Lite |
| Technical Information |
| Switching Time | 4 ms |
| Receptacles | 7 x NEMA 5-15R |
| Plug/Connector Type | NEMA 5-15P |
| Power Description |
| Input Voltage | 110 V AC |
| Output Voltage | 120 V AC Single-phase |
| Filtering | EMI / RFI |
| Frequency | 60 Hz |
| Load Capacity | 500 VA/300 W |
| Surge Energy Rating | 480 J |
| Waveform Type | Pulse-width Modulated Sine Wave |
| Input Voltage Range | 120 V AC Single-phase |
| Management |
| Emergency Power OFF | Yes |
| Network Management | SNMP Manageable Optional |
| Overload Protection | Via 15A input breaker |
| Alarm | Low Battery
On Battery
Overload
UPS Fault |
| Controls/Indicators |
| Status Indicators | 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. |
| Interfaces/Ports |
| Interfaces/Ports | 1 x USB
1 x DB-9 Serial |
| Modular Slots | 4 x Communications Slot |
| Battery Information |
| Backup/Run Time | 0.08 Hour 500 W Full Load
0.28 Hour 250 W Half Load |
| Battery Life | 26297.44 Hour to 52594.88 Hour |
| Battery Recharge Time | 4 Hour |
| Batteries | Sealed Lead Acid User Replaceable Hot-swappable |
| Environmental Conditions |
| Humidity | 0 to 95% Non-condensing Relative Humidity |
| Temperature | 0°C to 40°C Operating
-15°C to 50°C |
| Physical Characteristics |
| Weight (Approximate) | 8.53 kg |
| Color | Black |
| Form Factor | 1U Tower/Rack Mountable |
| Power Cord/Cable | 3.05 m |
| Width | 445.0 mm |
| Depth | 299.0 mm |
| Miscellaneous |
| Additional Information | SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression
500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices
Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included
Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts)
Maintains regulated 120V nominal output during brownouts as low as 90V
Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Two year warranty with $250,000 connected equipment insurance (USA & Canada only) |
| Package Contents | SMART500RT1U UPS System
Mounting hardware
Cabling for USB & DB9 monitoring and EPO switching
PowerAlert unattended shutdown and UPS/Power monitoring software
Warranty information and instruction manual |
| Software Included | PowerAlert Software |
| System Requirements | TYPICAL APPLCIATIONS:
Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. |
| Country of Origin | China |
| Warranty |
| Standard Warranty | 2 Year |